This repository has been archived on 2020-09-21. You can view files and clone it, but cannot push or open issues or pull requests.
FRC2016-old/Robot2016/wpilib/cpp/current/include/ctre/PDP.h
Jason 6d0e75aa64 Added new Robot project using PWM drive train... Much simpler...
Signed-off-by: Jason <jason@dublinschool.org>
2016-02-09 16:23:45 -05:00

63 lines
1.7 KiB
C++

#ifndef PDP_H_
#define PDP_H_
#include "ctre.h" //BIT Defines + Typedefs
#include "CtreCanNode.h"
class PDP : public CtreCanNode
{
public:
/* Get PDP Channel Current
*
* @Param - deviceNumber - Device ID for PDP. Factory default is 60. Function defaults to 60.
*/
PDP(UINT8 deviceNumber=0);
~PDP();
/* Get PDP Channel Current
*
* @Return - CTR_Code - Error code (if any)
*
* @Param - idx - ID of channel to return current for (channels 1-16)
*
* @Param - status - Current of channel 'idx' in Amps (A)
*/
CTR_Code GetChannelCurrent(UINT8 idx, double &status);
/* Get Bus Voltage of PDP
*
* @Return - CTR_Code - Error code (if any)
*
* @Param - status - Voltage (V) across PDP
*/
CTR_Code GetVoltage(double &status);
/* Get Temperature of PDP
*
* @Return - CTR_Code - Error code (if any)
*
* @Param - status - Temperature of PDP in Centigrade / Celcius (C)
*/
CTR_Code GetTemperature(double &status);
CTR_Code GetTotalCurrent(double &currentAmps);
CTR_Code GetTotalPower(double &powerWatts);
CTR_Code GetTotalEnergy(double &energyJoules);
/* Clear sticky faults.
* @Return - CTR_Code - Error code (if any)
*/
CTR_Code ClearStickyFaults();
/* Reset Energy Signals
* @Return - CTR_Code - Error code (if any)
*/
CTR_Code ResetEnergy();
private:
uint64_t ReadCurrents(uint8_t api);
};
extern "C" {
void * c_PDP_Init();
CTR_Code c_GetChannelCurrent(void * handle,UINT8 idx, double *status);
CTR_Code c_GetVoltage(void * handle,double *status);
CTR_Code c_GetTemperature(void * handle,double *status);
void c_SetDeviceNumber_PDP(void * handle,UINT8 deviceNumber);
}
#endif /* PDP_H_ */